Title: The Stepless Automatic Transmission
Description: What is a Stepless Transmission?
Description: What is a Stepless Transmission?
obxbiker - October 15, 2006 12:58 AM (GMT)
The Stepless Automatic Transmission
Scooter Automatic Stepless Transmission
What is a Stepless Transmission?
With a stepless transmission there is no clutch, there is no gear shift, and on a scooter, there is not even a shift control of any sort. One does not not even sense a shift of gears while driving. This makes scooter riding extremely simple and easy but there are a couple of dangers that are worth noting. First some basic concepts.
The internal combustion engine is most powerful when running within fairly narrow RPM (Rotations Per Minute) range (unlike other engines such as steam or electric which are not nearly as limited). In order to accelerate a vehicle over a wide range of velocities while the engine remains within its optimum RPM range, gears are used to change the ratio of motor RPM to wheel RPM. In manual and standard automatic transmissions these ratio shifts take place several times during acceleration and are handled manually by the driver or automatically by the transmission respectively.
More correctly known as a Continuously Variable Transmission (CVT), the stepless transmission used in most modern motorscooters is a type of automatic transmission whose "gear ratio" changes automatically to any arbitrary setting within the limits of the system and is not constrained to a discrete series of specific ratios -- the 3 or 4 ratios of typical automotive transmissions. As a result, accelerating with a CVT is a very smooth uninterrupted process. On the motorscooter, this effect is achieved using a belt between two pulleys whose effective radii are variable and change according to the speed of the vehicle -- one radius increasing while the other decreases -- thus accommodating a constant belt length.
Things to watch for
Normally the driver of a CVT scooter need pay little heed to the transmission operation but there are some points to keep in mind.
It is easy to go faster than you realize. When accelerating, the engine at first revs up to its comfortable RPM range and then remains there while acceleration continues as the ratio changes to make wheel RPM faster while engine RPM remains the same. The driver of traditional transmissions is used to gauging vehicle speed by motor speed as, within one gear, they are always fixed relative to each other. Such a driver is not expecting vehicle speed to continue increasing while engine RPMs remain constant and may easily not notice as speed increases.
In order to accelerate to, and then maintain an optimum target speed on a CVT motorscooter, one has to get used to engine speeds first increasing, then remaining constant, and, as one approaches the desired speed, easing off on the throttle and experiencing and recognizing the seemingly unnatural sensation of motor speed decreasing while vehicle speed continues to increase -- yes, that is exactly what is happening as the CVT continues to shift gradually up. Scooterists find themselves automatically making accommodation for this phenomenon, in many cases without even noting this peculiar anomaly which is thoroughly unknown with traditional gearing systems. Still it is worth knowing what is happening and understanding the process.
Stepless transmission: belt slip
Belts do stretch over time and as they loosen fail to transmit power to the wheels. Belt replacement is one of the standard maintenance chores of the CVT scooterist. Symptoms indicating belt replacement are very simply: engine is running fine but scooter is not going anywhere. Keep a spare belt handy.
Apparent but deceptive belt slip
When one starts climbing a steep hill with some speed, one experiences another sensation unknown to drivers of traditional transmissions -- the scooter slows down dramatically while motor speed increases. This can certainly give the impression that the belt is slipping, that the work of the engine is becoming ineffectual. Actually, this is simply the effect of the CVT "gearing down." Of course, when the belt does begin to slip, it stands to reason than it will first be noticeable going up a steep hill, so pay attention to what is happening.
Scooter Automatic Stepless Transmission
What is a Stepless Transmission?
With a stepless transmission there is no clutch, there is no gear shift, and on a scooter, there is not even a shift control of any sort. One does not not even sense a shift of gears while driving. This makes scooter riding extremely simple and easy but there are a couple of dangers that are worth noting. First some basic concepts.
The internal combustion engine is most powerful when running within fairly narrow RPM (Rotations Per Minute) range (unlike other engines such as steam or electric which are not nearly as limited). In order to accelerate a vehicle over a wide range of velocities while the engine remains within its optimum RPM range, gears are used to change the ratio of motor RPM to wheel RPM. In manual and standard automatic transmissions these ratio shifts take place several times during acceleration and are handled manually by the driver or automatically by the transmission respectively.
More correctly known as a Continuously Variable Transmission (CVT), the stepless transmission used in most modern motorscooters is a type of automatic transmission whose "gear ratio" changes automatically to any arbitrary setting within the limits of the system and is not constrained to a discrete series of specific ratios -- the 3 or 4 ratios of typical automotive transmissions. As a result, accelerating with a CVT is a very smooth uninterrupted process. On the motorscooter, this effect is achieved using a belt between two pulleys whose effective radii are variable and change according to the speed of the vehicle -- one radius increasing while the other decreases -- thus accommodating a constant belt length.
Things to watch for
Normally the driver of a CVT scooter need pay little heed to the transmission operation but there are some points to keep in mind.
It is easy to go faster than you realize. When accelerating, the engine at first revs up to its comfortable RPM range and then remains there while acceleration continues as the ratio changes to make wheel RPM faster while engine RPM remains the same. The driver of traditional transmissions is used to gauging vehicle speed by motor speed as, within one gear, they are always fixed relative to each other. Such a driver is not expecting vehicle speed to continue increasing while engine RPMs remain constant and may easily not notice as speed increases.
In order to accelerate to, and then maintain an optimum target speed on a CVT motorscooter, one has to get used to engine speeds first increasing, then remaining constant, and, as one approaches the desired speed, easing off on the throttle and experiencing and recognizing the seemingly unnatural sensation of motor speed decreasing while vehicle speed continues to increase -- yes, that is exactly what is happening as the CVT continues to shift gradually up. Scooterists find themselves automatically making accommodation for this phenomenon, in many cases without even noting this peculiar anomaly which is thoroughly unknown with traditional gearing systems. Still it is worth knowing what is happening and understanding the process.
Stepless transmission: belt slip
Belts do stretch over time and as they loosen fail to transmit power to the wheels. Belt replacement is one of the standard maintenance chores of the CVT scooterist. Symptoms indicating belt replacement are very simply: engine is running fine but scooter is not going anywhere. Keep a spare belt handy.
Apparent but deceptive belt slip
When one starts climbing a steep hill with some speed, one experiences another sensation unknown to drivers of traditional transmissions -- the scooter slows down dramatically while motor speed increases. This can certainly give the impression that the belt is slipping, that the work of the engine is becoming ineffectual. Actually, this is simply the effect of the CVT "gearing down." Of course, when the belt does begin to slip, it stands to reason than it will first be noticeable going up a steep hill, so pay attention to what is happening.